2" Water Transfer Petrol Pump 5.5hp Engine
Description
The 2" Water Transfer Petrol Pump is a portable, high-volume utility pump designed for high-flow agricultural irrigation, pool drainage, and dewatering applications. Driven by a 5.5hp 4-stroke overhead-valve petrol engine, it delivers reliable, grid-free mechanical water transfer without requiring electricity. Engine Output: 5.5 Horsepower (approx. 4.1 kW) at 3600 RPM. Inlet/Outlet Size: 2-inch (50mm) BSP threaded connections. Maximum Flow Rate: Generates roughly 30,000 to 35,000 Litres per Hour (~500–583 L/min). Maximum Pressure: Measures around 35–37 PSI. Maximum Lift Head: Pumps water vertically up to 24–28 metres. Maximum Suction Depth: Lifts water out of wells or pits from depths up to 7–8 metres. Fuel Capacity: Features a 3.6-litre fuel tank running on standard unleaded petrol. Pump Housing: Built from lightweight, anti-corrosive cast aluminum alloy. High-Flow Direct Drive: The engine shaft links directly to a solid cast impeller to eliminate complex gear systems, reducing power loss and mechanical wear. Ceramic & Carbon Seals: Durable mechanical face seals prevent water from leaking backward into the crankcase, significantly extending the pump's operational lifespan. Heavy-Duty Roll Cage Frame: A protective tubular steel frame shields the engine block from job site damage while doubling as a carrying handle.Low-Oil Auto Cut-Out: An integrated safety float switch automatically shuts down or blocks ignition if oil levels drop too low, protecting the engine from catastrophic failure.
Specifications
-
Key Feature Noun/Adjectiv:5.5hp Engine
-
Rated Flow:583Lpm
-
Rated Pressure:35PSI
-
Power Source:Petrol
-
Power Rating kW:4.1
-
Power Rating hp:5.5
-
Inlet Size Type:2 BSP
-
Outlet Size and Type:2 BSP
-
Material:Aluminium
-
Weight KG:23.3
